For use with DENALI ATV Snow Plow Systems. Kit Contents: • Springs - quantity 2

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2016-2019 Yamaha Wolverine R-Spec EPS 2016-2019 Yamaha Wolverine R-Spec 2019 Yamaha Wolverine X2 2018-2019 Wolverine X4 Please note: 2016-2017 R-Spec Special Editions will require additional drilling out of two holes

DENALI UTV Snow Plow Pulley Fairlead Kit is ready for snow! Designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system. The Plow Pulley Fairlead easily attaches to the winch mount and replaces the hawse or roller fairlead during the plow season. Kit Contents: Roller - Wide spool (3? x 6?) bolt patterns - Replaces the winch fairlead during the plow season - Curved cable groove helps eliminate flattening and breaking of cable - Multiple roller positions for different cable angles - For use with Steel AND Synthetic cables - Sheave - Includes pulley, 1/4? clevis hook and nylon strap - Allows greater precision when raising/lowering plow blade - Increase the angle of pull - Cable - 12? length, 1/4? diameter - Single braid, dyneema rope - Galvanized steel thimble/eyelet - No kinks, rust or metal splinters - Low stretch and recoil - Colors may vary

DENALI Replacement Holddown Bars keep the Rubber Flap tight against the plow blade to prevent snow from flying over the snow plow blade and works with all DENALI ATV/UTV Standard and Pro Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Features • 3/16? thick Grade 50 steel; high strength, high yield Kit Contents: • One (1) 66″ holddown bar • Please Note: contains NO hardware or rubber flap

DENALI UTV Pushtube Lift Kits bolt directly to existing DENALI UTV Standard Pushtubes to accommodate for oversize tires and lifted UTV and SxS machines. It is important that the pushtube height matches the height of the machine to allow the plow blade to sit level on the ground. for use ONLY with DENALI UTV Pushtubes bolts directly to DENALI UTV Standard Pushtubes (NOT Extended Pushtubes), providing 2” or 4” lift allows plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground install at time of purchase or at a later date NOTE: lift kits will NOT work with mount plate MA11752

DENALI UTV Pushtube Lift Kits bolt directly to existing DENALI UTV Standard Pushtubes to accommodate for oversize tires and lifted UTV and SxS machines. It is important that the pushtube height matches the height of the machine to allow the plow blade to sit level on the ground. for use ONLY with DENALI UTV Pushtubes bolts directly to DENALI UTV Standard Pushtubes (NOT Extended Pushtubes), providing 2” or 4” lift allows plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground install at time of purchase or at a later date NOTE: lift kits will NOT work with mount plate MA11752

DENALI Replacement Holddown Bars keep the Rubber Flap tight against the plow blade to prevent snow from flying over the snow plow blade and works with all DENALI ATV/UTV Standard and Pro Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Please Note: will NOT work with the DENALI Universal 72 Plow. Features • 3/16? thick Grade 50 steel; high strength, high yield Kit Contents: • One (1) 72? holddown bar (two pieces, 36" each) • Please Note: contains NO hardware or rubber flap

DENALI UTV Universal Snow Plows are made to handle the toughest conditions and hold up against sand, snow and ice. The central mounting position of the plow kit disperses the force of impact to the sturdiest part of the UTV, preventing damage to the front end or other vehicle parts from sudden impact. Our easy-connect design makes for a quick attachment of the plow to your UTV for when the snow begins to fly. Then, when winter draws to a close, take the plow back off in a matter of minutes. The durable universal snowplow mount plate is specifically engineered to fit most UTVs and can remain on your vehicle year round. This is a perfect UTV plow for light-duty use. Please Note: All DENALI Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight Series winch. Kit Contents: - 72? UTV Snow Plow Blade - UTV Pushtubes - Wearbar - Skid Feet - Rubber Flap - Plow Flags - Plow Mount - Installation Hardware and Instructions Specs: - Snow plow blade (17-inch scoop) made of 12-gauge steel - Horizontal and vertical stabilizer supports made from 10-gauge steel - 65 degree attach angle and over center design ensures snow rolls up and is thrown forward - Pushtubes easily position the snow plow blade in 5 different angles 0, 12.5 and 25 degrees - Reversible & replaceable wearbar - Height adjustable steel skid feet - 1 Year Warranty Fitment - most UTV models

IMPACT Pro Garden Tractor Plow Kits are made to handle conditions including sand, dirt, snow, and ice. Plow attaches and detaches with four bolts for seasonal use and storage. This Front Mounted plow disperses the force of impact to the chassis of the garden tractor. Kit Contents: - 46? Plow Blade - Pushtubes - Two (2) Wearbars (grading and snow) - Plow Mount (machine specific) - Skid Feet - Installation Hardware and Instructions Specs: - 46? plow blade formed from a single piece of 11-gauge steel - One (1) horizontal support bar adds rigidity - Two (2) 7-gauge vertical stabilizers - Heavy duty, adjustable trip springs and lockout blade prevent tripping when plowing dirt - Mount attaches securely to frame with four (4) included bolts - Three (3) different plow blade angles - Adjustable hand lift - Two (2) 1/4? steel wearbars - one for snow plowing and one for dirt leveling and landscaping - Height adjustable, 3/8? steel skid feet - 2 Year Warranty Fitment - Cub Cadet XT1 - Cub Cadet XT2 - Husqvarna - John Deere 100 Series - most garden tractors - Mount interior dimensions are 13? - Please call for fitment information - 866.527.7637, option 1

Please Note: do NOT work with DENALI UTV Pushtube Lift Kits (2 inch or 4 inch) Provides 15" greater length than standard push tube

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2011-2020 John Deere XUV 625i 2011-2020 John Deere XUV 825i 2011-2020 John Deere XUV 855d

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2013+ Kubota RTV 500, 900, 1100 2013+ Kubota RTV 500, 900, 1100 with 1 1/4" Front Hitch Please Note: for 2013+ Kubotas with a 2" Front Receiver Hitch installed, call for more fitment info at 866.527.7637

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2012-2014 400 Kubota RTV 4x4 2009-2014 500 Kubota RTV 4x4 2004-2009 900 Kubota RTV (with 1 1/4" Front Hitch) 2011-2012 900 Kubota RTV (with new style rectangle tube bumper) 2008-2010 1100 Kubota RTV (with 1 1/4" Front Hitch) 2011-2012 1100 Kubota RTV (with new style rectangle tube bumper) Please Note: will NOT work with Kubota 500, 900 or 1100 with a 2" Front Receiver Hitch installed

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2017-2019 Textron Stampede

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2015-2016 Odes Dominator X 2017 Odes Dominator X 1000 2014-2016 Odes Raider 800 2x4 2015-2017 Odes Raider 1000 2x4

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2021-2022 Polaris Ranger 1000 Premium, EPS and XP models (requires Polaris front brushguard) NOTE: does NOT work with base model NOTE: does NOT work with extended pushtubes NOTE: lift kits will NOT work with mount plate MA11752 NOTE: interference is possible when plow is turned at extreme angles when using tracks

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2015-2021 Mule PRO FXT 2016-2021 Mule PRO FX 2016-2021 Mule PRO DXT

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2020-2021 Yamaha Wolverine RMAX

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2020-2021 Kawasaki KRX 1000 (all models)

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2014-2020 Yamaha Viking

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2013-2016 Odes Dominator 800 2x4, 4x4 2015-2016 Odes Dominator 1000 2x4, 4x4

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2006-2011 Yamaha Rhino 450 2004-2008 Yamaha Rhino 660 2008-2013 Yamaha Rhino 700

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2017-2021 Yamaha YXZ 1000R

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2002-2008 Polaris Ranger 2008-2009 Polaris Ranger Crew

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate.Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately.Specs:- 1/4" steel- 100% laser cut- Black, industrial powder coat finish- Includes mounting hardware and detailed instructionsFitment:2015-2021 RZR 9002015-2021 RZR-4 9002014-2020 RZR 1000 XP2014-2020 RZR-4 1000 XP2016-2021 RZR Turbo XP2016-2021 RZR-4 Turbo XP2021 RZR 1000S Trail

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2018-2021 RZR Turbo S 2019-2021 RZR-4 Turbo S Please Note: will NOT work with Polaris Winch Mount (P/N 2883828)

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2015-2017 Polaris Ranger 570 Full Size 2015-2017 Polaris Ranger 570 Crew Full Size 2016-2017 Polaris Ranger 570 XP 4x4 (Channel Tube Roll Cage) 2013-2021 Polaris Ranger XP900 2013-2021 Polaris Ranger XP900 Crew 2016-2021 Polaris Ranger XP900 High Lifter model 2017-2020 Polaris Ranger 1000 XP 2017-2020 Polaris Ranger 1000 XP Crew 2015-2018 Polaris Ranger 1000 Diesel 2016-2018 Polaris Ranger 1000 Diesel Crew 2019-2020 Polaris Ranger XP 1000 Northstar

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2010-2014 Polaris Ranger 400 2017-2020 Polaris Ranger 500 Mid Size 2014-2021 Polaris Ranger 570 Midsize 2014-2021 Polaris Ranger 570 Crew Mid Size 2013-2014 Polaris Ranger 800 Midsize 2015-2017 Polaris Ranger ETX 2016-2022 Polaris Ranger 570 Full Size (Round ROPS / Round Tube Roll Cage)

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2008-2014 RZR 2008-2014 RZR-S 2008-2014 RZR-4 2012-2021 RZR 570 & 570-S (includes 2020-2021 Trail models) 2008-2014 RZR 800 2011-2014 RZR XP 900 2011-2014 RZR XP 4 900 (4 seater)

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2009-2014 Polaris Ranger Full Size 2010-2014 Polaris Ranger Crew Full Size Please Note: does NOT fit 2013-2017 Ranger XP900 (or Crew)

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2008-2013 Kawasaki Teryx (2-seater)

DENALI Snow Plow Rubber Flaps prevent snow from flying over the snow plow blade and work with all DENALI ATV and UTV Standard and Pro Series Snow Plow Systems. Please Note: will NOT work with the DENALI Universal 72 Plow. Features Upgraded (stiffer) rubber flap Specific to the blade size of 72″ Kit Contents: Rubber Flap Metal Holddown Bar Installation Hardware

DENALI Commercial Grade Snow Plow Markers are necessary for seeing the edge of plow blades. Features Stainless steel base Flexible to -50° F Highly visible orange color Includes hardware Quantity of 2 Please Note: DENALI Plow Flags are only compatible with DENALI Standard and Pro Series Snow Plow Blades. They do NOT work with the DENALI 72 inch Universal Plow System

DENALI ATV replacement skid feet for DENALI ATV snow plow blades are sold as individual items. Kit Contents: ATV Skid Foot (qty 1) Cotter Pin (qty 1) Will NOT work on UTV Plows

DENALI Replacement Rubber Flaps prevent snow from flying over the snow plow blade and works with all DENALI UTV Standard Plow Blades. Please Note: will NOT work with the DENALI Universal 72 Plow. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Features • Upgraded (stiffer) rubber flap • Specific to blade size of 72? Kit Contents: • One (1) rubber flap • Please Note: contains NO hardware or holddown bar

Click the question mark ? by the drop down list to see complete fitment. The DENALI UTV Flush Mount Dash Switch is designed to work with DENALI Hydroturns for snow plowing! The dash switch sits flush on the dash board for easy use and gives a polished look for an aftermarket, OEM look. Specs: Universal connectors, both bullet and spade terminals included Waterproof OEM factory installed look Sits flush on the dash board Designed to work with DENALI UTV Hydroturns Includes switch, wiring, template and installation instructions

DENALI ATV/UTV Snow Plow Pulley Fairlead Kit is ready for snow! Designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system. The Plow Pulley Fairlead easily attaches to the winch mount and replaces the hawse or roller fairlead during the plow season. Kit Contents: Roller - Standard spool (3? x 4 7/8?) bolt patterns - Replaces the winch fairlead during the plow season - Curved cable groove helps eliminate flattening and breaking of cable - Multiple roller positions for different cable angles - For use with Steel AND Synthetic cables - Sheave - Includes pulley, 1/4? clevis hook and nylon strap - Allows greater precision when raising/lowering plow blade - Increase the angle of pull - Cable - 12? length, 1/4? diameter - Single braid, dyneema rope - Galvanized steel thimble/eyelet - No kinks, rust or metal splinters - Low stretch and recoil - Colors may vary

DENALI UTV replacement skid feet for DENALI UTV Standard and Pro Series Snow Plow Blades are sold as individual items. Please Note: work only with DENALI Standard and Pro Series plows. They do NOT work with the DENALI Universal 72 Plow Kit Contents: UTV Skid Foot (qty 1) Rubber Bushings (qty 2) Flat Washers (qty 4) Cotter Pin (qty 1) Will NOT work on ATV Plows

DENALI ATV Snow Plow Accessory Kit for 50? blades includes a rubber flap kit to prevent snow from flying over the blade and commercial grade plow markers to make seeing the edge of the snow plow blade easier.  Plow Pulley Fairlead Kit is also included - which is designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system. . Features Upgraded (stiffer) rubber flap Stainless steel base on markers Flexible to -50° F (markers) Highly visible orange color Kit Contents: One (1) rubber flap - 60? One (1) metal hold down bar - 60? Two (2) plow markers/flags One (1) standard spool plow roller One (1) sheave (pulley, 1/4? clevis hook and nylon strap) One (1) plow cable Installation hardware

6'-8' length, 1/4? diameter Single braid, AmSteel Blue rope Galvanized steel thimble/eyelet No kinks, rust or metal splinters Low stretch and recoil

DENALI Box Ends are designed to work with DENALI UTV Standard Plow Blades (lengths 60", 66" and 72"). Gathering snow without rolling it off the side of the blade, the box ends bolt on to the side of the plow using existing holes. Please Note: will NOT work with the DENALI Universal 72 Plow or the DENALI Pro 66" or 72" Blades. Specs: 1/4? thick steel Height and angle adjustable skid foot brackets included Kit Contents: Two (2) Box End Kits Two (2) Skid Foot Brackets Installation hardware and instructions

DENALI Replacement Rubber Flaps prevent snow from flying over the snow plow blade and works with all DENALI UTV Standard Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Features • Upgraded (stiffer) rubber flap • Specific to blade size of 66? Kit Contents: • One (1) rubber flap • Please Note: contains NO hardware or holddown bar

DENALI Replacement Rubber Flaps prevent snow from flying over the snow plow blade and works with all DENALI ATV Standard Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Features • Upgraded (stiffer) rubber flap • Specific to blade size of 50″ Kit Contents: • One (1) rubber flap • Please Note: contains NO hardware or holddown bar

DENALI UTV 66? Snow Plow Blade Polyurethane Wearbar Specs: • 66? (W) x 4? (H) x 1? (D) Features: • Reversible: Longer use life • High Flexibility: Will not bend or break with impact damage reduction on road surfaces and trucks, even at -35° • Extended Work-Life: Better wearing properties than UHMW. Outlasts rubber by up to 10 times and steel by up to 5 times. Lower maintenance costs, increased productivity and profits • Non-Damaging to Surfaces: Cutting edge will not damage Brick/Cobblestone, Stamped Concrete or Asphalt, Paver Stones, Parking Lots, Curbs, Speed Bumps, or Manhole Covers like steel bars • Less Equipment Wear: Due to the higher vibration absorption property of polyurethane • Benefits of Polyurethane Over Rubber Cutting Edges: Polyurethane memory bounces back to its original shape after impact. Rubber holds its flexed shape, severely reducing efficiency and work life Kit Contents: • 66? Polyurethane Wearbar • Mounting Hardware

DENALI ATV Snow Plow Accessory Kit for 60? blades includes a rubber flap kit to prevent snow from flying over the blade and commercial grade plow markers to make seeing the edge of the snow plow blade easier. Plow Pulley Fairlead Kit is also included - which is designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system. . Features Upgraded (stiffer) rubber flap Stainless steel base on markers Flexible to -50° F (markers) Highly visible orange color Kit Contents: One (1) rubber flap - 60? One (1) metal hold down bar - 60? Two (2) plow markers/flags One (1) standard spool plow roller One (1) sheave (pulley, 1/4? clevis hook and nylon strap) One (1) plow cable Installation hardware

DENALI UTV Snow Plow Rubber Flaps prevent snow from flying over the snow plow blade and work with all DENALI UTV Snow Plow Systems. Features Upgraded (stiffer) rubber flap Specific to the blade size of 66? Kit Contents: Rubber Flap Metal Holddown Bar Installation Hardware

DENALI UTV 50? Snow Plow Blade Polyurethane Wearbar Specs: • 50? (W) x 4? (H) x 1? (D) Features: • Reversible: Longer use life • High Flexibility: Will not bend or break with impact damage reduction on road surfaces and trucks, even at -35° • Extended Work-Life: Better wearing properties than UHMW. Outlasts rubber by up to 10 times and steel by up to 5 times. Lower maintenance costs, increased productivity and profits • Non-Damaging to Surfaces: Cutting edge will not damage Brick/Cobblestone, Stamped Concrete or Asphalt, Paver Stones, Parking Lots, Curbs, Speed Bumps, or Manhole Covers like steel bars • Less Equipment Wear: Due to the higher vibration absorption property of polyurethane • Benefits of Polyurethane Over Rubber Cutting Edges: Polyurethane memory bounces back to its original shape after impact. Rubber holds its flexed shape, severely reducing efficiency and work life Kit Contents: • 50? Polyurethane Wearbar • Mounting Hardware

DENALI Replacement Holddown Bars keep the Rubber Flap tight against the plow blade to prevent snow from flying over the snow plow blade and works with all DENALI ATV/UTV Standard and Pro Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Features • 3/16? thick Grade 50 steel; high strength, high yield Kit Contents: • One (1) 60? holddown bar • Please Note: contains NO hardware or rubber flap