DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2016-2021 Defender all models 2021 Defender HD10

DENALI UTV 66? Snow Plow Blade Polyurethane Wearbar Specs: • 66? (W) x 4? (H) x 1? (D) Features: • Reversible: Longer use life • High Flexibility: Will not bend or break with impact damage reduction on road surfaces and trucks, even at -35° • Extended Work-Life: Better wearing properties than UHMW. Outlasts rubber by up to 10 times and steel by up to 5 times. Lower maintenance costs, increased productivity and profits • Non-Damaging to Surfaces: Cutting edge will not damage Brick/Cobblestone, Stamped Concrete or Asphalt, Paver Stones, Parking Lots, Curbs, Speed Bumps, or Manhole Covers like steel bars • Less Equipment Wear: Due to the higher vibration absorption property of polyurethane • Benefits of Polyurethane Over Rubber Cutting Edges: Polyurethane memory bounces back to its original shape after impact. Rubber holds its flexed shape, severely reducing efficiency and work life Kit Contents: • 66? Polyurethane Wearbar • Mounting Hardware

For use with DENALI UTV Standard and Pro Series Snow Plow Systems. Please Note: will NOT work with the DENALI Universal 72 Plow. Kit Contents: • Springs - quantity 2

For use with DENALI ATV Snow Plow Systems. Kit Contents: • Springs - quantity 2

DENALI UTV Snow Plow Mounts are used for DENALI UTV Snow Plows. They are made of 100% laser cut 1/4" steel and includes all the necessary hardware for mounting. Custom slotted holes allow the plow blade to hug the ground while the overall design of the side walls is formed from the body to maximize the strength of the mount. All components of the mount are welded together to create an impact resistant plow mount plate. Please Note: the silver, Quick Release Pins, are NOT included with the purchase of the plow mount plate. They are available for sale separately. Specs: - 1/4" steel - 100% laser cut - Black, industrial powder coat finish - Includes mounting hardware and detailed instructions Fitment: 2016-2019 Yamaha Wolverine R-Spec EPS 2016-2019 Yamaha Wolverine R-Spec 2019 Yamaha Wolverine X2 2018-2019 Wolverine X4 Please note: 2016-2017 R-Spec Special Editions will require additional drilling out of two holes

DENALI UTV Snow Plow Pulley Fairlead Kit is ready for snow! Designed specifically to resist wear from the steep angle that occurs between the winch and the plow, thus extending the life of your plow lift system. The Plow Pulley Fairlead easily attaches to the winch mount and replaces the hawse or roller fairlead during the plow season. Kit Contents: Roller - Wide spool (3? x 6?) bolt patterns - Replaces the winch fairlead during the plow season - Curved cable groove helps eliminate flattening and breaking of cable - Multiple roller positions for different cable angles - For use with Steel AND Synthetic cables - Sheave - Includes pulley, 1/4? clevis hook and nylon strap - Allows greater precision when raising/lowering plow blade - Increase the angle of pull - Cable - 12? length, 1/4? diameter - Single braid, dyneema rope - Galvanized steel thimble/eyelet - No kinks, rust or metal splinters - Low stretch and recoil - Colors may vary

DENALI Replacement Holddown Bars keep the Rubber Flap tight against the plow blade to prevent snow from flying over the snow plow blade and works with all DENALI ATV/UTV Standard and Pro Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Features • 3/16? thick Grade 50 steel; high strength, high yield Kit Contents: • One (1) 66″ holddown bar • Please Note: contains NO hardware or rubber flap

DENALI UTV Pushtube Lift Kits bolt directly to existing DENALI UTV Standard Pushtubes to accommodate for oversize tires and lifted UTV and SxS machines. It is important that the pushtube height matches the height of the machine to allow the plow blade to sit level on the ground. for use ONLY with DENALI UTV Pushtubes bolts directly to DENALI UTV Standard Pushtubes (NOT Extended Pushtubes), providing 2” or 4” lift allows plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground install at time of purchase or at a later date NOTE: lift kits will NOT work with mount plate MA11752

DENALI UTV Pushtube Lift Kits bolt directly to existing DENALI UTV Standard Pushtubes to accommodate for oversize tires and lifted UTV and SxS machines. It is important that the pushtube height matches the height of the machine to allow the plow blade to sit level on the ground. for use ONLY with DENALI UTV Pushtubes bolts directly to DENALI UTV Standard Pushtubes (NOT Extended Pushtubes), providing 2” or 4” lift allows plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground install at time of purchase or at a later date NOTE: lift kits will NOT work with mount plate MA11752

DENALI Replacement Holddown Bars keep the Rubber Flap tight against the plow blade to prevent snow from flying over the snow plow blade and works with all DENALI ATV/UTV Standard and Pro Plow Blades. Please verify the DENALI Snow Plow Blade that you are replacing the rubber flap on to ensure correct fitment. Please Note: will NOT work with the DENALI Universal 72 Plow. Features • 3/16? thick Grade 50 steel; high strength, high yield Kit Contents: • One (1) 72? holddown bar (two pieces, 36" each) • Please Note: contains NO hardware or rubber flap