Want a clean look to mount an awesome light bar to your Polaris Pro R or Turbo R?  Look no further than our Fury Light Bar Brackets that adjust to hold light bars from 30" to 40"!  Powder coated black and sold as a set.  They fit directly on the torx screws in your stock cage roof to hold the light bar in an optimal position.

Top of the line LED whips. These 187 Whips can stream, cascade, chase, etc. They are Bluetooth controlled via the Bledim app and are user-programmable. They can also move to music/sound via the app. *Comes with 1 controller and "Y" harness. Due to different wiring options, our power harness is not included with this set. Power harness can be purchased in our webstore. On & Off switch NOT Included*Only 1 controller required for use of two whips.

This kit allows you to easily mount your Rock Light 2.0's onto your Yamaha YXZ 1000.Fits all 2016-2023 Yamaha YXZ 1000's.Kit includes (8) brackets.

This kit allows you to easily mount your Rock Light 2.0's onto your RZR.Fits all 2017-2023 RZR XP1000 and Turbo models.Kit includes (8) brackets.

This kit allows you to easily mount your Rock Light 2.0's onto your Can-Am Maverick X3.Kit includes (8) brackets.

Our 8″ Rock Light utilizes 72 LED’s, making it the brightest Rock Light available on the market today! Easily pair this 187-style Rock Right with your Whips, Halos, or Eyebrows. All 4 Pod kits include a controller, extensions, and Y-splitters.1 Pod kits include 1 extension and 1 Y-splitter.

All 4, 6, and 8 Pod kits include a controller, extensions, and Y-splitters. 1 Pod kit includes 1 extension and 1 Y-splitter. INSTRUCTIONS REMOTE INSTRUCTIONS WIRING INSTRUCTIONS

5150’s new Rock Light 2.0’s here! These are an all-new, ultra-sleek design that utilizes the same style LED as our 187 whips. Each Rock Light employs 24 LEDs, making them the brightest available in the market today. They are very shallow, making them very simple to install cleanly. Available in 1, 4, 6, 8, and 10 Pod configurations. All 4, 6, and 8 Pod kits include a controller, extensions, and Y-splitters. 1 Pod kits include one extension and one Y-splitter.

Don't want to use a clamp system to hold your rear whips?  Tired of your whips being in the way all the time?  Look no further, we have your solution!  Our rear whip mounts bolt directly on the back of your RZR at the cage mounting point and utilizes the stock hardware.  They are secure and strong enough so you'll never have to be frustrated again!  Powder coated black and sold as a set of 2.

Tired of those cheap A-Pillar light brackets that cause your lights to vibrate? So are we. We have manufactured an A-Pillar light bracket that is laser cut and bent for extra strength and precision fitment. Say goodbye to shaky A-Pillar lights! These brackets come with a black powder coat and ready to bolt on using your factory roll cage bolts.  Available as single or dual pod mounts and sold as a set of 2.

Length: 5.00Width: 4.00Height: 1.00Weight: 0.20Brand: RIGIDCountry of Origin: USA

Length: 15.00Width: 9.00Height: 1.00Weight: 0.30Brand: RIGIDCountry of Origin: USA

Length: 5.00Width: 4.00Height: 0.50Weight: 0.10Brand: RIGIDCountry of Origin: USA

Length: 15.00Width: 8.00Height: 2.50Weight: 0.30Brand: RIGIDCountry of Origin: USA

Length: 12.00Width: 9.00Height: 3.00Weight: 1.00Brand: RIGIDCountry of Origin: USA

Length: 15.00Width: 8.00Height: 2.50Weight: 0.20Brand: RIGIDCountry of Origin: USA

Length: 20.00Width: 15.00Height: 3.00Weight: 0.60Brand: RIGIDCountry of Origin: USA

3 Optic Zones - Scene, Driving, Spot Slow, Moderate & High-Speed Beam Patterns Seamless Beam Transition Active Power Management™ System -Power Capacity Sensing Active View Technology™ - Internal GPS Module Use In Adapt Mode Or All On Works With Factory Stator or Battery Fits Most Off Road Motorcycles Impact Resistant Polycarbonate Lens Durable UV Polyester Powder Coat Pressure Equalizing Vent Operating Temp -22F to +158F/-30C to +70C 9-32 VDC Alloy Housing and Heatsink Limited Lifetime Warranty Off Road Use Only KIT INCLUDES: Number Plate, Amber Light Cover, Mounting Bracket & Hardware, Wire Harness & 3 Position Switch Length: 5.00Width: 17.00Height: 20.50Weight: 6.00Brand: RIGIDCountry of Origin: USA

3 Optic Zones - Scene, Driving, Spot Seamless Beam Transition Slow, Moderate & High-Speed Beam Patterns Two Layers of Adaptive Response Active Power Management™ System - Power Capacity Sensing Active View Technology™ - Internal GPS Module Use In Adapt Mode Or All On 9-32 VDC Impact Resistant Polycarbonate Lens Durable UV Polyester Powder Coat Universal Fit Operating Temp -22F to +158F/-30C to +70C Alloy Housing and Heatsink Patented Optics 50,000 Hour+ LED Lifespan Limited Lifetime Warranty Off Road Use Only Length: 8.50Width: 13.00Height: 6.50Weight: 5.00Brand: RIGIDCountry of Origin: USA

RIGID introduces the world’s most advanced Rear Facing Chase Light Bar. The Chase Bar is a rear facing LED light that adds safety and functionality to any UTV, or other off-road vehicle by combining running, brake, reverse, turn signal, and more into a single compact package. Pre-programmed features include strobe, scroll, flash, and all on and can be fully customized to any vehicle trigger. The Chase Bar’s advanced technology also includes a dim option which reduces the light bar’s output by 50% to accommodate specific environments and needs. This light bar is 28 inches long and has programmable triggers: running and three auxiliary triggers. The user can program each trigger by choosing from 27 pre-programmed modes for a completely custom setup. The running and auxiliary triggers allow for the selection of one of the pre-programmed modes or to customize your own for an astounding 300,000 plus possible configurations. Compliant with multiple race series that require strobe blue, amber, green and red. The RIGID Chase light bar is available with either adjustable tube mounts to fit 1.75 to 2 inch roll cages or 15 degree horizontal mounting brackets. Each kit Includes a 13 inch lead for custom wiring; professional installation is strongly recommended. This fully customizable Chase LED light bar from RIGID is packed with features and makes it easier than ever to Own The Night.Length: 6.00Width: 33.62Height: 6.00Weight: 6.90Brand: RIGIDCountry of Origin: USA

RIGID’s RGB LEDs provide the user with the ability to toggle between eight available back light options with the flip of a switch: Red, Green, Blue, Light Blue, Purple, Amber, White or Rotating. The RIGID Radiance Plus SR-Series single row LED light bar is the perfect solution for those who want RIGID’s legendary quality at a level everyone can attain. Utilizing RIGID’s LED technology, the Radiance Plus light bars feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand. Length: 12.00Width: 6.00Height: 6.00Weight: 5.00Brand: RIGIDCountry of Origin:

Stainless Steel Mounting Brackets Mounting Hardware Length: 14.50Width: 8.00Height: 2.00Weight: 0.80Brand: RIGIDCountry of Origin: USA

9-36 VDC Pressure Equalizing Vent High Impact Polycarbonate Lens Dedicated Wire to Run Back-Lighting IP68 Compliant - Dust/Water Ingress Removable Surround for Color Matching High-Grade Aluminum Alloy Housing and Heatsink Length: 6.25Width: 9.00Height: 6.50Weight: 3.22Brand: RIGIDCountry of Origin: USA

RIGID introduces the all-new 360-Series family of LED lights. The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market. Choose between a 4-inch or 6-inch light, preferred backlight color, and beam pattern for a customized experience and look. RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application. Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night. Harness sold separately 9-36 VDC Pressure Equalizing Vent High Impact Polycarbonate Lens Dedicated Wire to Run Back-Lighting P68 Compliant - Dust/Water Ingress Removable Surround for Color Matching High-Grade Aluminum Alloy Housing and Heatsink Length: 6.25Width: 9.00Height: 6.50Weight: 3.22Brand: RIGIDCountry of Origin: USA

RIGID introduces the all-new 360-Series family of LED lights. The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market. Choose between a 4-inch or 6-inch light, preferred backlight color, and beam pattern for a customized experience and look. RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application. Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night. Harness sold separately. 9-36 VDC Pressure Equalizing Vent High Impact Polycarbonate Lens Dedicated Wire to Run Back-Lighting IP68 Compliant - Dust/Water Ingress Removable Surround for Color Matching High-Grade Aluminum Alloy Housing and Heatsink Kit Includes: Stainless Steel Mounting Brackets and Mounting Hardware Length: 6.25Width: 9.00Height: 6.50Weight: 3.22Brand: RIGIDCountry of Origin: USA

RIGID introduces the all-new 360-Series family of LED lights. The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market. Choose between a 4-inch or 6-inch light, preferred backlight color, and beam pattern for a customized experience and look. RIGID’s 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application. Available in 4 backlight colors: red, white, blue or amber. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night. Harness sold separately. 9-36 VDC Pressure Equalizing Vent High Impact Polycarbonate Lens Dedicated Wire to Run Back-Lighting IP68 Compliant - Dust/Water Ingress Removable Surround for Color Matching High-Grade Aluminum Alloy Housing and Heatsink Length: 6.25Width: 9.00Height: 6.50Weight: 3.22Brand: RIGIDCountry of Origin: USA

The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGID’s legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. Harness, Switch & Relay Included 3 Optic Zones - Scene, Driving, Spot Seamless Beam Transition Slow Speed, Moderate Speed & High Speed Beam Patterns 9-36 VDC Two Layers of Adaptive Response Active Power Management™ System - Power Capacity Sensing Active View Technology™ - Internal GPS Module Use In Adapt Mode Or All On Limited Lifetime Warranty Alloy Housing and Heatsink Unbreakable Polycarbonate Lens Pressure Equalizing Vent Black Exposed Printed Circuit Board Patented Optics 50,000 Hr+ LED Lifespan Off Road Use Only Fits All Existing E-Series Grilles, Mounts, & Light Covers Length: 23.25Width: 6.00Height: 6.00Weight: 9.00Brand: RIGIDCountry of Origin: USA

Length: 12.90Width: 6.40Height: 6.40Weight: 7.87Brand: RIGIDCountry of Origin: USA

Length: 13.00Width: 6.30Height: 6.50Weight: 7.88Brand: RIGIDCountry of Origin: USA

Length: 7.60Width: 23.90Height: 6.90Weight: 7.85Brand: RIGIDCountry of Origin: USA

Length: 3.00Width: 6.00Height: 6.00Weight: 1.50Brand: RIGIDCountry of Origin: USA

Not all off-road situations require the same light intensity. RIGID Rear Facing High & Low Dual Function LED Lights in Amber or Red provide the flexibility to adjust the lighting to the conditions with the flip of a switch. These lights feature a three-wire harness, and the High, Low, or Off three-position rocker switch gives the user an option to run at full intensity on High power, or 20% intensity on Low power. Use the Low intensity mode for a Low Powered running light and the High Powered as a braking light. The RIGID Rear Facing High & Low Dual Function LED Lights feature a thermally engineered oversized heat sink to provide superior cooling power and a 50,000-hour lifespan. If one-size-fits-all lighting does not work for your needs, then the Rigid Rear Facing High & Low Function LED Lights are the perfect choice for adapting to changing conditions. 50,000+ Hour Lifespan 9-36 V DC Durable UV Polyester Powder Coat GORE® Pressure Equalizing Vent Harness & Switch Included (Exclusions Apply) High-Grade Aluminum Alloy Heatsink Integrated Thermal Management System Impact Resistant Polycarbonate Lens P68 Compliant – Dust / Water Ingress Mounting Brackets Included Over / Under Voltage Protection Operating Temp -40º F ~ +145º F / -40º C ~ +60º C Protected Against RFI / EMI Patented Technology Reverse Polarity Protection RoHS Compliant SAE J575 Compliant – Shock / Vibration Waterproof Deutsch Connector (Exclusions Apply) Length: 6.00Width: 8.00Height: 6.00Weight: 4.00Brand: RIGIDCountry of Origin: USA

E-Series™ and SR-Series® Roof Mounts secures E-Series or SR-Series light bars into place, providing you with the perfect lighting solution. Made with 100% stainless steel, these easy to install bolt in mounts, work only with the factory cageLength: 6.00Width: 6.00Height: 6.00Weight: 1.80Brand: RIGIDCountry of Origin: USA

Cool White LED Color 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up Durable Polycarbonate Lens Billet Aluminum Housing Black Powder Coat Finish Assembled in the USA Length: 9.00Width: 5.00Height: 3.00Weight: 1.00Brand: RIGIDCountry of Origin: USA

50,000+ Hour Lifespan 9-36 V DC Durable UV Polyester Powder Coat GORE® Pressure Equalizing Vent Harness & Dash Controller Included High-Grade Aluminum Alloy Heatsink Integrated Thermal Management System Impact Resistant Polycarbonate Lens IP68 Compliant – Dust / Water Ingress Mounting Brackets Included Over / Under Voltage Protection Op. Temp -40º F ~ +145º F / -40º C ~ +60º C Protected Against RFI / EMI Patented Technology Reverse Polarity Protection RoHS Compliant SAE J575 Compliant – Shock / Vibration Active View™ Technology - Automatically Change Beam Patterns Based On Vehicle Speed Dash Controller & Under Dash Module with Wiring Harness Molded RIGID Dash Controller with 2 User Presets – Preset Both Beam Pattern Mode & Accent Lighting Colors 8 Selectable Beam Patterns from 15-Degrees to 90-Degrees Integrated Optic Design with Spot, Flood, and Driving Zones Selectable RGB-W Accent Lighting – With User-Configuration, Choose from any Color in the Light Spectrum Back Lit Molded Dash Controller - Enables User to Select Mode, Accent Color, Adaptive Mode, and Select Between 2 User Presets Multiple Mounting Locations; Traditional Side Mounting or Underside Low-Profile *Stealth Mount *(Sold Separately) Patent-Pending Technology Length: 23.80Width: 6.90Height: 7.20Weight: 9.45Brand: RIGIDCountry of Origin: USA

Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection Length: 10.00Width: 6.00Height: 0.50Weight: 0.12Brand: RIGIDCountry of Origin: USA

Length: 7.00Width: 9.00Height: 7.00Weight: 4.00Brand: RIGIDCountry of Origin: USA

Length: 7.00Width: 9.00Height: 7.00Weight: 4.00Brand: RIGIDCountry of Origin: USA

Not all off-road situations require the same light intensity. RIGID Rear Facing High & Low Dual Function LED Lights in Amber or Red provide the flexibility to adjust the lighting to the conditions with the flip of a switch. These lights feature a three-wire harness, and the High, Low, or Off three-position rocker switch gives the user an option to run at full intensity on High power, or 20% intensity on Low power. Use the Low intensity mode for a Low Powered running light and the High Powered as a braking light. The RIGID Rear Facing High & Low Dual Function LED Lights feature a thermally engineered oversized heat sink to provide superior cooling power and a 50,000-hour lifespan. If one-size-fits-all lighting does not work for your needs, then the Rigid Rear Facing High & Low Function LED Lights are the perfect choice for adapting to changing conditions. 50,000+ Hour Lifespan 9-36 V DC Durable UV Polyester Powder Coat GORE® Pressure Equalizing Vent Harness & Switch Included (Exclusions Apply) High-Grade Aluminum Alloy Heatsink Integrated Thermal Management System Impact Resistant Polycarbonate Lens P68 Compliant – Dust / Water Ingress Mounting Brackets Included Over / Under Voltage Protection Operating Temp -40º F ~ +145º F / -40º C ~ +60º C Protected Against RFI / EMI Patented Technology Reverse Polarity Protection RoHS Compliant SAE J575 Compliant – Shock / Vibration Waterproof Deutsch Connector (Exclusions Apply) Length: 7.00Width: 7.00Height: 7.00Weight: 4.00Brand: RIGIDCountry of Origin: USA

Length: 7.00Width: 7.00Height: 7.00Weight: 4.00Brand: RIGIDCountry of Origin: USA

Patented Specter Optics 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & assembled in the USA Length: 6.00Width: 6.00Height: 5.00Weight: 2.00Brand: RIGIDCountry of Origin: USA

Patented Specter Optics 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Cast Aluminum Housing Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Kit includes: Pulg and Play Harness with Switch Includes Mounting Brackets and Necessary Hardware Length: 6.00Width: 6.00Height: 5.00Weight: 1.00Brand: RIGIDCountry of Origin: USA

RIGID revolutionized the lighting industry with the introduction of the RDS-Series, and recent advancements in LED technology have made them more powerful than ever before with the RDS-Series PRO, Professional Race Output. With an improved output of up to 70% more raw lumens, the RDS-Series PRO projects more usable light exactly where it's needed on the road ahead. By taking an E-Series light bar and treating it to a gentle arc, the patented RDS-Series PRO provides a sleek, integrated look with the curved windshields and bumpers on today's trucks and SUVs. The curve is for more than just looks, it is also functional: the arc of the RDS-Series PRO light bars provides a wider spread of LED light, providing unmatched lighting coverage with a single light bar. RDS-Series PRO also includes updated branding and blacked-out circuit boards for a more refined look. It's all about stealth with RIGID's new Midnight Optics. Utilizing our exclusive spot optic with a transparent black enamel coating, our Midnight Optics take the subtle "blacked out" look seriously featuring black oxide hardware. The Midnight Optics enable RIGID to "disappear" during the day while still providing powerful LED technology to light up the night. Thanks to improved LED technology, the Midnight Edition now offers more light output than ever before. Midnight Optics are available in E-Series, RDS-Series and D-Series product lines. Emits a 10° cone of light from each LED Unmatched output for wider spread Certified IP-68 for water & dust intrusion Certified to MIL-STD-810G for shock/ vibration Unbreakable polycarbonate lens UV & Abrasion resistant powder coat. Custom two-bolt mounting system for adjustability and strength. Unmatched Output & Efficiency Length: 6.00Width: 24.00Height: 6.00Weight: 7.00Brand: RIGIDCountry of Origin: USA

6 A-Series LED Lights (with 15' leads) Includes: Wire Harness Watts: 24 Amp Draw: 1.2A LED's: 18 Raw Lumens: 2400 Length: 6.00Width: 8.00Height: 6.00Weight: 4.00Brand: RIGIDCountry of Origin: USA

4 A-Series LED Lights (with 15' leads) Includes: Wire Harness Watts: 16W Amp Draw: 0.8A LED's: 12 Raw Lumens: 1600 Length: 6.00Width: 8.00Height: 6.00Weight: 3.00Brand: RIGIDCountry of Origin: USA

Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection Length: 1.00Width: 3.00Height: 3.00Weight: 1.00Brand: RIGIDCountry of Origin: CN

Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection Length: 1.00Width: 3.00Height: 3.00Weight: 1.00Brand: RIGIDCountry of Origin: CN

One of RIGID’s most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS pod incorporates the same powerful optics and legendary LED technology as RIGID’s popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. Up to 50,000+ Hour Lifespan IP68 Compliant Impact Resistant Lens GORE® Pressure Equalizing Vent Harness & Switch Included Mounting Brackets Included Length: 6.00Width: 6.00Height: 5.00Weight: 2.50Brand: RIGIDCountry of Origin: USA