The Multi-Mount System for the Kawasaki KRX provides a simple and clean installation for your two-way mobile radio and Rugged intercom. Installation is easy!  • Load the two-way radio and intercom into the insert, then slide the insert into the mount and secure with the 4 screws.  • It’s really that simple!Vehicle Compatibility:• Kawasaki Teryx KRX 1000 Compatible Radios: Rugged Radios M1 / G1 / G4 /GMR25 / GMR45 / RM45 / RM60 / RDM-DB Icom F5021 Kenwood TK7360 Motorola CM300D and Motorola/Vertex VX2200 Compatible Intercoms: Rugged Radios RRP357 Rugged Radios RRP360 Rugged Radios RRP362 Rugged Radios RRP364 Rugged Radios RRP660 Rugged Radios RRP660PLUS Rugged Radios RRP686 Rugged Radios RRP696 Rugged Radios RRP696PLUS Rugged Radios RRP5050 Rugged Radios RRP6100 Rugged Radios STX

This KRX low profile upper dash mount provides clearance for most windshields while maintaining an unobstructed forward view. It's the perfect setup for a radio and remote head (rocker switch) intercom or accessory switch. Features a simple and clean installation in a low profile design. Includes: KRX Top Mount Radio specific insert Hardware Vehicle Compatibility:  Kawasaki Teryx KRX 1000 Compatible Radios: Rugged Radios M1 / G1 / G4 / GMR25 / GMR45 / RM45 / RM60 / RDM-DB Icom F5021 Kenwood TK7360 Compatible Intercoms: Rugged Radios RRP696PLUS Remote Head Rugged Radios STX Remote Head

“THE BLOW HOLE” for UTV’s brings our respected and valued snowmobile product along with its heat fighting abilities to increase the longevity of the drivetrain and ultimately your investment. We developed this out of a desperate need to increase belt and clutch life. Out in the extreme conditions of the sand dunes, it has become commonplace to remove the belt covers in a desperate attempt to prevent belt failures. While removal of the cover does help with belt failures, the increased contact with the sand leads to premature clutch wear and failure. The same cases can be seen in any environment such as rock crawling and trail riding. This is why we adapted “THE BLOW HOLE” to fit the UTV market. The clutches and drive belt show up as a weak link as the added load is converted to wasted heat energy. This waste heat deteriorates drive belts, and breaks down composite bearing surfaces and parts which lead to increased inefficiency. This loss of efficiency only provides more ways to make heat and the vicious cycle repeats until failure. UTV’s place extreme loads on their clutches and belt which builds extreme heat. This heat, in turn, will end up costing you money and riding time. It leads to premature wear on your clutches, and complete belt and clutch failure. “THE BLOW HOLE” for UTV’s places a high output auxiliary fan in the cooling ducts of your clutch housing. It dramatically reduces average temperatures generated in the clutch system and also speeds cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors. Model Fitments Include: 2020-2024 2 Seaters 2020-2024 4 Seaters Low amp draw DC fan (2.0 amp startup and 1.7amp continuous) does not over tax the electrical system. Motor is very water/dust resistant and designed to operate in adverse conditions Heavy duty welded aluminum design is rugged enough to take abuse but lightweight Pulls approximately 225 CFM (cubic feet per minute) of air through the clutch ductwork enhancing the OEM clutch fan Air is removed from the clutch housing and fan installation does not inhibit or otherwise interfere with belt changes Active venting system that expels hot air even at low ground speeds as opposed to OEM rpm dependent clutch mounted fan Clutches and belt stay cooler which allows them to last longer and work better. Belt dust and other fine debris are essentially vacuumed out of the clutch cover area so clutches stay cleaner. Factory connector allows true plug and play install. Also allows quick disconnect for troubleshooting and repair work on machine.

Vehicle Compatibility: Kawasaki Teryx KRX 1000 Take your Kawasaki Teryx KRX 1000 to the next level with a complete communication kit that not only delivers clear in-car conversations, Bluetooth connectivity, and long-range vehicle-to-vehicle radio communication, but also features a custom Rugged Radios mount designed specifically for your Kawasaki. This means your UTV gets a clean, factory-style installation that looks as good as it performs. Built to handle high-noise, off-road environments, this system keeps you connected, entertained, and in control on every ride. Customize Your Kit: Radio: Pick the M1 VHF Business Band or the G1 GMRS. Both radios are IP67 waterproof and built rugged for off-road conditions. Intercom: Choose the 696PLUS or upgrade to the STX for true stereo music. Both include Bluetooth and VOX music-dimming. Intercom Style: Choose a standard body intercom for a traditional setup, or choose a remote head version for a clean, tucked-away install. (Availability may vary depending on the kit and vehicle.) Mount Location: Choose from available mounting options to achieve a custom, vehicle-specific fit that looks factory-installed. Features: Seamless in-car communication with clear intercom audio for driver and passengers Bluetooth connectivity to pair with phones, GPS, and other devices for music and calls VOX music-dimming automatically lowers music when passengers speakSimple audio controls for quick volume and music shuffle adjustments Long-range 2-way radio communication keeps you connected with other vehicles and base camp IP67 waterproof radio housing built to handle off-road conditions Clear communication with optional helmet wiring kits, headsets, and wired helmets (sold separately) Includes: (1) Master Communication Kit (1) RRP696 PLUS or STX Stereo Intercom (standard body or remote head) (1) M1 or G1 Waterproof Mobile Radio (Business Band or GMRS) (2) Intercom Cables (1) Driver PTT (Steering Wheel) (1) Passenger PTT (Grab Bar) (1) 15 ft. Antenna Coax Cable with 3/8" NMO Mount (1) Long Range Antenna (POINT5 or VHF 1/2 Wave) (1) Active Filter (2) Packs of R-Wrap Reusable Cable Ties (1) Radio/Intercom Mount Note: Helmet wiring kits or headsets are not included and must be added separately to complete your system. Radio license is required. Click here for Business Band license information or click here for GMRS.

Vehicle Compatibility: 2026 Kawasaki Teryx4 and Teryx5 H2 Take your Kawasaki H2 to the next level with a complete communication kit that not only delivers clear in-car conversations, Bluetooth connectivity, and long-range vehicle-to-vehicle radio communication, but also features a custom Rugged Radios mount designed specifically for your Kawasaki. This means your H2 gets a clean, factory-style installation that looks as good as it performs. Built to handle high-noise, off-road environments, this system keeps you connected, entertained, and in control on every ride. Customize Your Kit: Radio: Pick the M1 VHF Business Band or the G1 GMRS. Both radios are IP67 waterproof and built rugged for off-road conditions. Intercom: Choose the Remote Head 696PLUS or upgrade to the STX for true stereo music. Both include Bluetooth and VOX music-dimming. Intercom Style: Remote head version offers a clean, tucked-away installation with all intercom controls on the rocker switch. Mount Location: Center mount houses the radio while the intercom rocker switch installs in an available switch hole. Features: Seamless in-car communication with clear intercom audio for driver and passengers Bluetooth connectivity to pair with phones, GPS, and other devices for music and calls VOX music-dimming automatically lowers music when passengers speakSimple audio controls for quick volume and music shuffle adjustments Long-range 2-way radio communication keeps you connected with other vehicles and base camp IP67 waterproof radio housing built to handle off-road conditions Clear communication with optional helmet wiring kits, headsets, and wired helmets (sold separately) Includes: (1) Master Communication Kit (1) RRP696 PLUS or STX Stereo Remote Head Intercom  (1) M1 or G1 Waterproof Mobile Radio (Business Band or GMRS) (2) Intercom Cables (1) Driver PTT (Steering Wheel) (1) Passenger PTT (Grab Bar) (1) 15 ft. Antenna Coax Cable with 3/8" NMO Mount (1) Long Range Antenna (POINT5 or VHF 1/2 Wave) (1) Active Filter (2) Packs of R-Wrap Reusable Cable Ties (1) Radio Mount Note: Helmet wiring kits or headsets are not included and must be added separately to complete your system. Radio license is required. Click here for Business Band license information or click here for GMRS.

Vehicle Compatibility: Kawasaki Teryx4 and Teryx5 H2  The powder coated, stamped steel bracket is lightweight, making installation clean and simple for our most popular radios. Features: Finish: Black powder coated Construction: steel Mounting: hardware included Dimensions: 6-7/8" x 2-5/8" Compatible Radios: Rugged Radios M1 / G1 / G4 / GMR45 / RM45 / RM60 Radio not included.

KEL-XP1KBJ Best Ball Joint on the market. Best materials, hardened body and stem, stem is built from AMERICAN made 4340 and hardened for maximum strength and wear resistance. Adjustable and greaseable with a replaceable boot. "Lifetime Warranty" against manufacture defects and breakage.  Redesigned to include our boot retaining ring. This ring increases the boot sealing area and keeps the boot where it needs to be when riding deep mud and power washing etc...