HCR is proud to introduce the all new CAN-AM Defender front forward high clearance a-arms and high clearance rear a-arms both with built in lift. The front arms are pushed forward 2.5” to clear a larger tire. To build on top of that we built the front and rear control arms to have up to a 3” lift. This lift is built into the arms to make the installation process a breeze. No pesky brackets to deal with. Designed to tackle all types of terrain, these arms are built out of our proprietary material that are 30% stronger then 4130 Chromoly. To complement the strength and lift the high clearance lower arms are sure to keep you from high centering and keep you moving. Front Arms are not built with Sway Bar Mounts  For optimal clearance and performance a 4+3 wheel is recommended.*Some manufacturers 5+2 wheel will work but confirm true off set *23' models must use spec'd ZBROS Exit Shocks (OEM shocks will not work). FEATURES Can-Am Defender Forward A-Arm Suspension kit will add lift without adding shock brackets. Pushes front arms forward 2.5" allowing for more clearance in order to run larger tires. **Depending on tire manufacturer will fit up to 35" tires* Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High Clearance Boxed Front A-Arm Design 0.500" added ground clearance Each piece is Tig Welded by hand for strength and aesthetics Reuse of OEM ball joints to maximize low speed steering ease & smooth travel with less maintenance 100% Proudly Made in the U.S.A 100% Bolt-on installation using factory mounting points   CONFIRM FITMENT  PART# DEF-05300 / DEF-05310 Can-Am Defender HD 8 XT Cab : 2018+ Can-Am Defender HD 10 XMR : 2018+ Can-Am Defender HD 10 XT Cab : 2018+ Can-Am Defender MAX HD 8 XT Cab : 2018+ Can-Am Defender MAX HD 10 XT Cab : 2018+ Can-Am Defender MAX HD 10 XMR : 2019+ Can-Am Defender MAX Lone Star Edition : 2018+ Can-Am Defender MAX Limited : 2020+ ***If trying to convert any Non-Cab models to Cab model width, please call for more information.   KIT Includes: -4 Front Control Arms -4 Control Arms  -Hardware    

RZR-07300-1 HCR's proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Every external weld is an internal plate structured into the design. While the cost-effective approach is to run tube ends for ball joints , all HCR kits run a 4130 heat treated billet end allowing all internal and external plating to be attached to this billet eliminating a potential weak point. Billets are available in both balljoint and spherical applications. The custom alloy used to manufacture every HCR kit is 30% stronger in tensile and yield strength compared to 4130 Series chromoly. This HCR custom material endures several processes and is hardened for better wear resistance and overall strength. FEATURES Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High Clearance Boxed Front A-Arm Design 0.500" added ground clearance Each piece is Tig Welded by hand for strength and aesthetics Reuse of OEM ball joints to maximize low speed steering ease & smooth travel with less maintenance 100% Proudly Made in the U.S.A 100% Bolt-on installation using factory mounting points Larger front tube mounts are 1.25” in diameter with Delrin bushings for increased strength and durability.  Kit Contains: - 4 Front A-arms- Hardware- Install Guide     NOTE: You will re-use OEM ball joints in the front A-arms unless you have ordered OEM equivalents, or if you order the Spherical Bearing upgrade.

RZR-07300-2 HCR's proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Every external weld is an internal plate structured into the design. While the cost-effective approach is to run tube ends for ball joints , all HCR kits run a 4130 heat treated billet end allowing all internal and external plating to be attached to this billet eliminating a potential weak point. Billets are available in both balljoint and spherical applications. The custom alloy used to manufacture every HCR kit is 30% stronger in tensile and yield strength compared to 4130 Series chromoly. This HCR custom material endures several processes and is hardened for better wear resistance and overall strength. FEATURES Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity Each piece is Tig Welded by hand for strength and aesthetics Reuse of OEM ball joints to maximize low speed steering ease & smooth travel with less maintenance High-Clearance Rear Trailing Arms provide an increase of 2.75” in ground clearance 100% Proudly Made in the U.S.A 100% Bolt-on installation using factory mounting points    Kit Contains:- 2 Trailing Arms- Hardware    

PART # RZR-07600 HCR Racing is excited to announce an all new kit that enhances their product line for the popular Polaris RZR PRO XP. This all new Long-Travel Suspension Kit comes from the Industry leader in suspension products that adds to their line of OEM Replacement kits and their Long-Travel Suspension Systems . The Pro XP kit will be one that competes with other companies in the industry that provides a wider stance for stability, enhance ground clearance and compatible to use with Factory Shocks! [Built to Perform]The Long Travel Suspension Kit has been re-envisioned to their new design platform and styling that offers sleek approach angles, a rigid look and added clearance. These added clearances can be noticed in the Front A-arms adding 1.25” under the Lower A-arm arch area and 3” of ground clearance added in the Rear Trailing Arm.This new Long-Travel Suspension kit offers consumers the benefit of a little extra travel and stability with the +4” per sidetrack width. Embedded in the design is OEM caster / camber angles to eliminate the need for adjustable heim ends which provides a stronger mount for the arms pivot points. Each kit will come with 4 Front A-arms, 2 Trailing arms, 4 Rear Links. [Features]• +4 inches wider per side; Additional 8 inches of track width• Fiber Laser Cut construction for precise fit and finish• CNC'd 4130 heat treated billet mounting points for increased integrity• Angled catacomb design for optimal force distribution• High Clearance Boxed A-Arm Design• Hand TIG welded for strength and aesthetics• OEM ball joints are reused to maximize low speed steering, ease & smooth travel with less maintenance• Compatible with factory wheels• High-Clearance Arms provide 1.25” of front and 3” rear added ground clearance• 100% Bolt-on installation using factory mounting points Polaris RZR Pro XP Elite Long Travel Suspension Kit 4 Front A-arms 2 Rear Trailing arms 4 Complete Nitro Axles  Radius Rods  Radius Rod Back Plate Hardware Pack **This kit will require a Spring Upgrade  Please Call us for Suggestions ***    

PART # RZR-05706 RZR XP1K Mid-Travel Aluminum High Clearance HCR Spec Rear Links *PLEASE NOTE IN CHECKOUT WHAT YEAR YOUR RZR IS FOR THE CORRECT HUB HARDWARE WILL BE EITHER 10MM OR 12MM* 2 Lower High Clearance Link Bars2 Upper Link Bars6 5/8-18 RH Heims4 O-rings 8 Back plate end mis-alignment spacers8 Hub/wheel side mis-alignment spacers FITS : XP1000 MID TRAVEL KIT , RS1 MTS KIT  *Comes in Black Anodized finish* NOTE: Radius rods come pre-assembled, any damage done by removing uniballs to powder coat, or done by powder coating process will void any warranty. 

HCR Suspension's POLARIS RZR RS1 DUAL SPORT OEM REPLACEMENT FRONT CONTROL ARMS  Part #: RS1-05300-1 HCR's proprietary billet, slot and tab design and honeycomb boxed arms are built to withstand the beatings of rigorous off-road riding which achieving the optimal combination of strength and appeal. Every external weld is an internal plate structured into the design. While the cost-effective approach is to run tube ends for ball joints , all HCR kits run a 4130 heat treated billet end allowing all internal and external plating to be attached to this billet eliminating a potential weak point. Billets are available in both balljoint and spherical applications. The custom alloy used to manufacture every HCR kit is 30% stronger in tensile and yield strength compared to 4130 Series chromoly. This HCR custom material endures several processes and is hardened for better wear resistance and overall strength. FEATURES Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High Clearance Boxed Front A-Arm Design 1.250 added ground clearance Each piece is Tig Welded by hand for strength and aesthetics Reuse of OEM ball joints to maximize low speed steering ease & smooth travel with less maintenance 100% Proudly Made in the U.S.A 100% Bolt-on installation using factory mounting points 1.75" longer wheelbase for better high speed stability, hill climbing, and descents Larger front tube mounts are 1.25” in diameter with Delrin bushings for increased strength and durability. Factory Crush Sleeves Reused    Kit Contains:- 4 Front A-arms- Hardware- Install Guide  

HDW-MAV-01050  Replacement HCR X3 Front A-Arm Delrin Bushing Kit  Parts Included  16 Delrin Bushings for HCR Suspension 

PART# TAL-05500 HCR Racing is excited to announce an all new kit that enhances their product line for the popular Honda Talon 1000X. This all new Long-Travel Suspension Kit comes from the Industry leader in suspension products that adds to their line of OEM Replacement kits and their Long-Travel Suspension Systems . The Talon 1000X kit will be one that competes with other companies in the industry that provides a wider stance for stability, enhance ground clearance and compatible to use with Factory Shocks! [Built to Perform] The Long Travel Suspension Kit has been re-envisioned to their new design platform and styling that offers sleek approach angles, a rigid look and added clearance. These added clearances can be noticed in the Front A-arms adding 1.250" under the Lower A-arm arch area and 1.500" of ground clearance added in the rear trailing Arm.This new Long-Travel Suspension kit offers consumers the benefit of extra travel and extra stability. Embedded in the design is OEM caster / camber angles to eliminate the need for adjustable heim ends which provides a stronger mount for the arms pivot points. Each kit will come with 4 Front A-arms, 2 Trailing arms, 4 Rear Links. 4 Axle Bars. [Features] •4+ inches wider per side on the front and 5+inches wider per side on the rear for a total of 72" width all around to accommodate a uniform offset wheel for tire rotation and overall aesthetics • Fiber Laser Cut construction for precise fit and finish• CNC'd 4130 heat treated billet mounting points for increased integrity• Angled catacomb design for optimal force distribution• High Clearance Boxed A-Arm Design• Hand TIG welded for strength and aesthetics• OEM ball joints are reused to maximize low speed steering, ease & smooth travel with less maintenance• High-Clearance Arms provide 1.250" of front and 1.500" of rear added ground clearance• 100% Bolt-on installation using factory mounting points Honda Talon 1000X Long Travel Suspension Kit 4 Front A-arms 2 Rear Trailing arms 4 Rear High Clearance Radius Rods - Anodized Black 4 RCV Axle Bars Hardware Pack (Includes all required hardware for installation)

HCR is proud to introduce the all new CAN-AM Defender front forward high clearance a-arms and high clearance rear a-arms both with built in lift. The front arms are pushed forward 2.5” to clear a larger tire. To build on top of that we built the front and rear control arms to have up to a 3” lift. This lift is built into the arms to make the installation process a breeze. No pesky brackets to deal with. Designed to tackle all types of terrain, these arms are built out of our proprietary material that are 30% stronger then 4130 Chromoly. To complement the strength and lift the high clearance lower arms are sure to keep you from high centering and keep you moving. Front Arms are not built with Sway Bar mounts  For optimal clearance and performance a 4+3 wheel is recommended.*Some manufacturers 5+2 wheel will work but confirm true off set FEATURES Can-Am Defender Forward A-Arm Suspension kit will add lift without adding shock brackets. Pushes front arms forward 2.5" allowing for more clearance in order to run larger tires.  Laser Cut construction for precise fit and finish CNC'd Chromoly mounting points for increased integrity High Clearance Boxed Front A-Arm Design 0.500" added ground clearance Each piece is Tig Welded by hand for strength and aesthetics Reuse of OEM ball joints to maximize low speed steering ease & smooth travel with less maintenance 100% Proudly Made in the U.S.A 100% Bolt-on installation using factory mounting points   CONFIRM FITMENT PART# DEF-05300  Can-Am Defender HD 8 XT Cab : 2018+ Can-Am Defender HD 10 XMR : 2018+ Can-Am Defender HD 10 XT Cab : 2018+ Can-Am Defender MAX HD 8 XT Cab : 2018+ Can-Am Defender MAX HD 10 XT Cab : 2018+ Can-Am Defender MAX HD 10 XMR : 2019+ Can-Am Defender MAX Lone Star Edition : 2018+ Can-Am Defender MAX Limited : 2020+   ***If trying to convert any Non-Cab models to Cab model width, please call for more information. KIT Includes: -4 Front Control Arms -Hardware    

Replace Worn out Bushing with this Delrin Bushing Kit  12 - HDW-01010 Derin Bushings 4 - HDW-01030 Skinny Delrin Bushings  Fitment  HCR SUSPENSION - OEM , MTS and Long Travel Polaris RZR XP1000 Polaris RZR Turbo  Polaris RS1